Manually install the data cable inside the tower fan

To manually install the data cable inside a tower fan, follow these steps:

1. Unplug the tower Fan from the power source and ensure it is turned off.
2. Locate the data cable port on the tower fan. It is typically found on the control panel or at the base of the fan.
3. Take the data cable and align the connector with the port on the tower fan. Ensure that the connector is inserted correctly, matching the shape and orientation of the port.
4. Gently push the data cable connector into the port until it is fully inserted. You may hear a click or feel a slight resistance when it is properly connected.
5. Once the data cable is securely connected, check that it is not loose or easily disconnected.
6. If your tower fan has a cable management system, use it to organize and secure the data cable along with any other cables to prevent tangling or tripping hazards.
7. Finally, plug the tower fan back into the power source and turn it on to test if the data cable is functioning properly.

Note: It is important to refer to the specific instructions provided by the manufacturer of your tower fan for any additional steps or precautions to be taken during the installation process.

Convenient for injection molding.AC Power PCB