Manually make the fan internals

To manually make the fan internals, you will need the following materials and tools:

Materials:
- Motor: DC motor or any other suitable motor
- Fan blades: Plastic or metal blades
- Fan housing: Plastic or metal casing
- Wires: Electrical wires
- Screws: Small screws for assembly
- Power source: Battery or power supply

Tools:
- Screwdriver
- Wire cutters/strippers
- Soldering iron and solder
- Drill (optional)
- Hot glue gun (optional)

Step 1: Prepare the motor
- If the motor does not have wires attached, solder wires to the terminals of the motor.
- Strip the ends of the wires to expose the conductive metal.

Step 2: Attach the fan blades
- Take the fan blades and align them with the motor shaft.
- Depending on the type of motor, you may need to use a screwdriver to tighten the blades onto the shaft.
- Ensure that the blades are securely attached and can rotate freely.

Step 3: Create the fan housing
- If using a plastic casing, you can either purchase one or create your own by cutting and shaping a plastic sheet.
- If using a metal casing, you may need to use a drill to create holes for the motor and wires.

- Ensure that the housing is large enough to accommodate the motor and fan blades.

Electric Heater,Room Heater,Portable Heater,Electric Hot Water Heater